|
|
|
Product Name: Cherry Veneer (48in x 96in, wood-backed)
Product Notes: Wood-backed, 2-ply veneer, approximately 1/16" thick. Can be finished to match doors. Choose unfinished, or finished with stain color and varnish topcoat, or just topcoat (natural color).
Product Grouping: Plywood
| |
Product Name: Cherry Veneer (48in x 96in, wood-backed) Review and modify each option, as needed.
Category | Selected Option | Option Drawing | View/Modify | Finish Color: | Unfinished | | [Modify] | Finish Topcoat: | Sanded, ready for finish | | [Modify] |
| |
Product Name: Cherry Veneer (48in x 96in, wood-backed) |
Cost calculation (based on the selected options):
0
per item
plus
0
per square foot*
0
or more per linear inch*
plus
0
setup charge
0
per unit
List quantities: | Qty | Price | Select | IMPORTANT: Doors over 26in wide will be made with a center stile, creating left and right panels. (Does not apply to Slab, Edgebanded, or Routed MDF doors.)
| IMPORTANT: Doors over 48in tall will be made with a center rail, creating upper and lower panels. (Does not apply to Slab, Edgebanded, or Routed MDF doors.)
| IMPORTANT: Any order with one or more items greater than 90in wide or tall will be charged an oversize freight fee.
| | | 0 | 0 | >>> | 0 | $0.00 | | [UPDATE PRICE] | MINIMUM WIDTH: 0, MINIMUM HEIGHT: 0 (Changing option choices may alter the Minimums. Any item ordered which does not meet a minimum size requirement will be made as a complementary slab. Specify dimensions in inches, to closest 1/16".) |
| | |
|
|
Review the option choices listed below. • Click through the choices. A picture of the selected choice (if available) will appear below. • When you have found the one you want, select it then click the Confirm Selection button.
|
Finish Color: Important: All computer monitors and printers are different, so the colors may not come out exactly as pictured.
ALL finishes are coated with a clear, durable topcoat.
Glazes serve to highlight grooves and beads in the doors, fronts, etc.
| Finish Topcoat: Important: Satin (10-degree) sheen is available on all finishes. Semi-gloss (30-degree) sheen is available only on stain/no glaze finishes.
Effective 8/1/2023: 15-degree sheen has been replaced by 10-degree; 40-degree sheen has been replaced by 30-degree. These new sheens are inline with changing industry norms. To the naked eye, there is very little difference between the old and new unless they are put side to side. Sorry, we cannot match the sheen from an earlier order.
|
|
Note: Do not use your browser back button.
|
|