|
|
|
Product Name: OAK AMERICAN SLAB Drawer Front
Product Notes: Complements the Oak American door styles, with the same outside edge. Also available unfinished.
Product Grouping: Cope & Stick
Minimum Width*: 4 Minimum Height*: 2
Restrictions: Doors or Drawer Fronts over 48" tall with vertical grain panel will have a center rail. Doors or Drawer Fronts over 26" wide with vertical grain panel will have a center stile. (If horizontal panel grain is selected, then these maximums are reversed.) | | *Minimums will change if Frame Width is modified in the options. | |
Product Name: OAK AMERICAN SLAB Drawer Front Review and modify each option, as needed.
Option choices are restricted for this BARGAIN FAVORITES selection. For more option choices,
CLICK HERE.
Category | Selected Option | Option Drawing | View/Modify | Specie: | Red Oak (Standard Grade) | | [View] | Finish Color: | Nutmeg/No Glaze | | [Modify] | Finish Topcoat: | Sanded, ready for finish | | [Modify] | Outside Edge Profile: | E-3 |  | [View] | Panel Profile: | Slab |  | [View] | Panel Grain Direction: | Horizontal Grain | | [View] |
| |
Product Name: OAK AMERICAN SLAB Drawer Front |
Cost calculation (based on the selected options):
0
per item
plus
0
per square foot*
0
or more per linear inch*
plus
0
setup charge
0
per unit
|
|
Review the option choices listed below. • Click through the choices. A picture of the selected choice (if available) will appear below. • When you have found the one you want, select it then click the Confirm Selection button.
|
Specie:
| Finish Color: Important: All computer monitors and printers are different, so the colors may not come out exactly as pictured. Read FAQ for information on spray stains (SS).
ALL finishes are coated with a clear, durable topcoat.
Glazes serve to highlight grooves and beads in the doors, fronts, etc.
| Finish Topcoat: Important: Satin (10-degree) sheen is available on all finishes. Semi-gloss (30-degree) sheen is available only on stain/no glaze finishes.
Effective 8/1/2023: 15-degree sheen has been replaced by 10-degree; 40-degree sheen has been replaced by 30-degree. These new sheens are inline with changing industry norms. To the naked eye, there is very little difference between the old and new unless they are put side to side. Sorry, we cannot match the sheen from an earlier order.
| Outside Edge Profile:
| Panel Profile:
| Panel Grain Direction:
|
|
Note: Do not use your browser back button.
|
|